| PORTABLE DETECTION |
Tubes & Pumps
Colorimetric Gas Detection Tubes
RAE Systems' large selection of Colorimetric Gas Detection Tubes offer quick, on-the-spot measurements of many gases and vapors at low cost. The tubes are easy to read with a sharp, clear color change and provide accuracy with no need for calibration.
Click here for more information and specifications.
Accuracy Comparisons of RAE Systems Gas Detection Tubes. Click here to read.
RAE - SEP Benzene Tubes - click below datasheets for details:
|
Single Gas
ToxiRAE 3
The ToxiRAE 3 is a full-featured single-gas monitor that offers unequaled cost of ownership value. The ToxiRAE 3 is compatible with the AutoRAE Lite bump and calibration station. STEL, TWA, low, and high alarms can also be recorded. The detector is warranted for 2 years and maintenance free with replaceable battery.
Click here for more information and specifications.
|
| MULTI-GAS |
AreaRAE Steel
The AreaRAE Steel is an ATEX-certified multi-gas, wireless monitor. Housed in a welded stainless-steel enclosure, it is rugged, portable and weather-resistant, making it suitable for harsh environments. Ideal for hazardous materials and other emergency response monitoring applications, strategically placed AreaRAE Steel monitors can be used to quickly establish a perimeter, allowing first responders to back off to a safe position and monitor readings from up to 3 kilometers away.
The photoionization detector (PID) in the AreaRAE Steel can measure parts per million of volatile organic compounds (VOCs). In addition, it can be equipped with a lower explosive limit (LEL) sensor, an oxygen sensor, and one or two electrochemical toxic sensors for measuring specific substances such as hydrogen sulfide or chlorine.
Click here for more information and specifications. |
QRAE II Pump
The QRAE II is available as a diffusion or pumped one-to-four gas monitor for detection of combustibles, oxygen, hydrogen sulfide, carbon monoxide, or sulfur dioxide.
Key features include an easy-to-change battery pack, a water-resistant case and a new state-of-the-art O2 sensor.
Click here for more information and specifications. |
QRAE II Diffusion
The QRAE II is available as a diffusion or pumped one-to-four gas monitor for detection of combustibles, oxygen, hydrogen sulfide, carbon monoxide, or sulfur dioxide.
Key features include an easy-to-change battery pack, a water-resistant case and a new state-of-the-art O2 sensor.
Click here for more information and specifications. |
MultiRAE IR
The MultiRAE IR combines a PID (Photoionization Detector) and Carbon Dioxide (CO2) sensor with O2, LEL, and one specific toxic gas sensor in one compact monitor with sampling pump. The MultiRAE IR’s versatility allows it to replace a wide range of monitors, saving training and maintenance costs. The MultiRAE IR is quickly and easily changed from a sophisticated technician instrument to a simple text or display only monitor. The same monitor can be used as a personal monitor, a hand-held sniffer or as a continuous, operational area monitor for use in applications such as indoor air quality and industrial hygiene.
Click here for more information |
| PID (Photoionization Detectors) |
MiniRAE 3000
The MiniRAE 3000 is the most advanced handheld volatile organic compound (VOC) detector on the market. Its Photoionization Detector’s (PID) extended range of 0 to 15,000 ppm makes it an ideal instrument for applications from industrial hygiene, to leak and HazMat detection.
Click here for more information and specifications. |
ppbRAE 3000
The ppbRAE 3000 is the most advanced handheld volatile organic compound (VOC) on the market. Its Photoionization Detector’s (PID) extended range of 1 ppb to 10,000 ppm makes it an ideal instrument for applications from HazMat/Homeland Security, industrial hygiene, to Indoor Air Quality and military applications.
Click here for more information and specifications. |
MiniRAE Lite
The MiniRAE Lite is the most reliable hand-held volatile organic compound (VOC) monitor on the market. Its photoionization detector’s (PID) range of 0 to 5,000 ppm makes it an ideal instrument for applications ranging from environmental to construction.
Click here for more information. |
 AutoRAE Lite for QRAE II
The AutoRAE Lite is a high-speed and low-operation-cost bump test and calibration station with data storage in Excel format. The AutoRAE Lite provides the lowest cost of ownership, and direct functional bump test indication. In addition, the AutoRAE Lite operates on a low-pressure system with a built-in pump.
Click here for more information. |
 AutoRAE Lite for ToxiRAE 3
The AutoRAE Lite is a high-speed and low-operation-cost bump test and calibration station with data storage in Excel format. The AutoRAE Lite provides the lowest cost of ownership, and direct functional bump test indication of more than 700 monitors, all on one set of batteries.
In addition, the AutoRAE Lite operates on a low-pressure system with a built-in pump.
Click here for more information. |
| COMPOUND SPECIFIC |
UltraRAE 3000 Benzene Detector
The UltraRAE 3000 is the most advanced Compound-Specific Monitor on the market. Its Photoionization Detector’s (PID) extended range of 0.05 to 10,000 ppm in VOC mode and 50 ppb to 200 ppm in benzene-specific mode makes it an ideal instrument for applications from entry pre-screening during refinery and plant maintenance to hazardous material response, marine spill response and refinery down-stream monitoring.
Click here for more information.
For detailed technical specifications, click here.
Click here to view RAE Systems' Technical Note TN-127 "Benzene-Specific Measurements in Petroleum Hydrocarbons Using the RAE Systems UltraRAE" |
| FIXED DETECTION |
Transmitters
 RAEGuard PID
The RAEGuard PID is a permanently mounted (fixed) volatile organic compound (VOC) monitor using a Photoionization Detector (PID) transmitter that operates from a 9 to 36 VDC power source and provides an analog (4-20 mA) signal output in three full scale ranges* of 20 ppm, 100 ppm, or 1,000 ppm isobutylene equivalent. Housed in an explosion-proof enclosure, the RAEGuard PID is equipped with a local digital display of the gas concentration and functional keys for performing calibration. * Ranges are not selectable, and must be specified at the time of order.
Click here for more information. |
RAEGuard EC
The RAEGuard EC is a permanently mounted (fixed) toxic gas or oxygen sensor/transmitter that operates from a 9 to 36 VDC power source and provides an analog (4 to 20mA) and digital (RS-485) signal output. Housed in an explosion-proof enclosure, the RAEGuard EC is equipped with a local digital display of the gas concentration and function keys for performing calibration. The RAEGuard EC is operated with a standard 4 to 20mA/RS-485 controller or as a stand-alone sensor module.
Click here for more information.
|
RAEGuard LEL
The RAEGuard LEL is a permanently mounted (fixed) catalytic bead combustible gas detector/transmitter that operates from a 9 to 36 VDC power source and provides an analog (4 to 20mA) and digital (RS-485) signal output in the range of 0 to 100%LEL combustible gas. Housed in an explosion-proof enclosure, the RAEGuard LEL is equipped with a local digital display of the gas concentration and function keys for performing calibration. The RAEGuard LEL can be operated with a standard 4 to 20mA/RS-485 controller or as a stand-alone sensor module.
Click here for more information. |
| AREA DETECTION - WIRELESS |
Single-gas
MeshGuard
MeshGuard is a rugged, battery-powered toxic gas detector integrated with a wireless mesh radio modem. MeshGuards can quickly be installed in hazardous locations, and remote readings are displayed on the FMC 2000 wireless controller. Automatic network configuration makes the MeshGuard a truly unique wireless solution for remote chemical detection in hazardous areas. |
RAELink3
RAELink3 modem allows integration of many RAE Systems gas and radiation monitors, and select third-party devices into an AreaRAE wireless detection system. Monitors linked with a RAELink3 modem can communicate sensor data and GPS coordinates to a command center’s PC running ProRAE Remote Software up to 2 miles away. Bluetooth connectivity simplifies use with handheld monitors, while a user-friendly display and interface simplify configuration and status checking of the RAELink3. |